Lancom Systems LX-6400 3550 Mbit/s White Power over Ethernet (PoE)

Special Price £553.64 £664.37 Regular Price £1,021.60 £1,225.92
4 In stock
SKU
61821
Dual-radio access point as per Wi-Fi 6 (IEEE 802.11ax) for up to 3,550 Mbps, parallel operation at 2.4 GHz & 5 GHz, 4x4 MU-MIMO, OFDMA, USB, BLE, 1x 2.5GE, 1x GE, IEEE 802.3at PoE, WPA3, IEEE 802.1X, Multi-SSID, VLAN, int. antennas
Highly efficient Wi-Fi 6 for universal application purposes
Wi-Fi is omnipresent today, whether in office environments, schools, universities, shopping centres, sports stadiums or event locations. By using the LANCOM LX-6400 you get an excellent Wi-Fi experience. This Wi-Fi 6 access point offers low latency and high throughput per client even with high terminal device density. You can therefore trust the capabilities of High Efficiency Wireless – Made by LANCOM.

Dual concurrent Wi-Fi with an aggregated datarate of up to 3,550 Mbps
The LANCOM LX-6400 offers the Wi-Fi 6 standard (IEEE 802.11ax) for high-speed wireless LAN for clients in the 2.4- and 5-GHz bands. Wi-Fi 6 technology achieves transmission rates of up to 2.400 Mbps at 5 GHz and simultaneously up to 1.150 Mbps at 2.4 GHz.

4x4 Multi-User MIMO for downlinks and uplinks
Multi-user MIMO (MU-MIMO for short) simultaneously distributes all of the available spatial streams of the LANCOM LX-6400 between several different Wave 2 clients, rather than one after the other as was formerly the case. The available bandwidth is used efficiently and delays in the wireless network are substantially reduced. With Wi-Fi 6, MU-MIMO operates not only for the downlink but for the uplink as well.

OFDMA – carpooling in the radio field
Orthogonal Frequency Division Multiple Access (OFDMA) divides the frequency range of a Wi-Fi channel into a number of frequency blocks per unit of time. This creates subcarriers, which can be as narrow as just 2 MHz. Small data packets, so typical of IoT devices, no longer block entire 20-, 40- or even 80-MHz channels all by themselves. On the other hand, the Wi-Fi 6 access point is able to bundle multiple subcarriers. This is bit like carpooling, which stops the traffic being blocked by cars with just one occupant: Instead, the streets are freed up with just a few cars carrying several occupants.

160 MHz channel width
The access point can handle channel bandwidths of 20, 40, and 80 MHz (with 4 streams) and 160 MHz (with 2 streams). The channel width of 160 MHz enables a data throughput of up to 2.400 Mbps on appropriate terminals with two antennas that support the reception of two streams at 160 MHz in the 5 GHz frequency band.

Longer battery life thanks to TWT
Previously, smartphones, tablets and notebooks had to be ready to receive all the time so as not to miss their data packets. This can quickly use up battery charge. Wi-Fi 6 delivers a new technology to counteract power consumption on the client side. Target Wake Time, TWT for short, reduces consumption by allowing the access point and the client to negotiate exactly when the receiver should wake up to receive data packets.

Band steering
Optimized load balancing in your Wi-Fi by actively redirecting clients to the less congested and higher performance 5-GHz frequency band.

Operates via the LANCOM Management Cloud
The LANCOM LX-6400 offers unsurpassed user-friendliness: Managed through the LANCOM Management Cloud, it integrates into a holistic, automated network orchestration system based on software-defined networking technology.

Operation via WLC is in preparation
The LANCOM LX-6400 access point is due to operate with WLAN controllers as of early 2020. The alternative for centralized management is the LANCOM Management Cloud.

Wi-Fi security standard WPA3
WPA3, the successor of WPA2, offers important upgrades and security features for small ("WPA3-Personal") and large networks ("WPA3-Enterprise").

LANCOM security for wireless networks
With numerous integrated security features such as IEEE 802.1X, this enterprise-class access point provides optimal security for networks. Administrators and employees alike benefit from professional security policies on the network.

Versatile power supply
Thanks to the power supply via power over Ethernet as per IEEE 802.3at, the LANCOM LX-6400 operates at any PoE-powered Ethernet port. Alternatively, the access point operates with a power supply unit supplied with various plug adapters (EU, UK, US, AU).
More Information
SKU 61821
EAN 4044144618215
Specification
Data transmission
Ethernet LAN data rates10,100,1000,2500 Mbit/s
Maximum data transfer rate3550 Mbit/s
Performance
2.4 GHzYes
5 GHzYes
Firmware upgradeableYes
Spread spectrum methodOFDMA
Number of users511 user(s)
VLAN supportYes
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11v, IEEE 802.1x, IEEE 802.3at, IEEE 802.3az
Modulation256-QAM, 1024-QAM
Ethernet LAN data rates10,100,1000,2500 Mbit/s
Channel bandwidth160 MHz
CertificationCE : EN 62368-1:2014+AC:2015+A11:2017, EN 62479:2010, EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1, EN 300 328 V2.2.2, EN 301 893 V2.1.1 FCC Part 15B, 15C, 15E
Maximum data transfer rate3550 Mbit/s
MIMO typeMulti User MIMO
MIMOYes
Band steeringYes
Wireless LAN features
Modulation256-QAM, 1024-QAM
Network
Spread spectrum methodOFDMA
Number of users511 user(s)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11v, IEEE 802.1x, IEEE 802.3at, IEEE 802.3az
Bandwidth
Channel bandwidth160 MHz
Security
Cable lock slotYes
Security algorithmsAES-CCMP, AES-GCMP, EAP-FAST, EAP-GTC, EAP-PEAP, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA2, WPA3
Management features
VLAN supportYes
Quality of Service (QoS) supportYes
Firmware upgradeableYes
Certificates
CertificationCE : EN 62368-1:2014+AC:2015+A11:2017, EN 62479:2010, EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1, EN 300 328 V2.2.2, EN 301 893 V2.1.1 FCC Part 15B, 15C, 15E
Features
2.4 GHzYes
5 GHzYes
Spread spectrum methodOFDMA
Number of users511 user(s)
VLAN supportYes
Quality of Service (QoS) supportYes
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11v, IEEE 802.1x, IEEE 802.3at, IEEE 802.3az
Modulation256-QAM, 1024-QAM
Ethernet LAN data rates10,100,1000,2500 Mbit/s
Channel bandwidth160 MHz
Maximum data transfer rate3550 Mbit/s
Number of VLAN IDs4096
Maximal-Ratio Combining (MRC)Yes
Fast roamingYes
MIMO typeMulti User MIMO
MIMOYes
Band steeringYes
Maximum data transfer rate (2.4 GHz)1150 Mbit/s
Maximum data transfer rate (5 GHz)2400 Mbit/s
Ports & interfaces
USB connector typeUSB Type-A
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
DC-in jackYes
Power
Power over Ethernet (PoE)Yes
AC input voltage12 V
Design
Housing materialSynthetics
PlacementTable
Product colourWhite
LED indicatorsYes
CertificationCE : EN 62368-1:2014+AC:2015+A11:2017, EN 62479:2010, EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1, EN 300 328 V2.2.2, EN 301 893 V2.1.1 FCC Part 15B, 15C, 15E
Cable lock slotYes
Cable length3 m
Cable lock slot typeKensington
Antenna
Antenna typeInternal
Antennas quantity8
Antenna gain level (max)7 dBi
Technical details
Firmware upgradeableYes
Cable length3 m
Harmonized System (HS) code85176990
Indication
LED indicatorsYes
Software
Number of VLAN IDs4096
Maximal-Ratio Combining (MRC)Yes
Fast roamingYes
Weight & dimensions
Width205 mm
Depth205 mm
Height42 mm
Packaging data
Quick start guideYes
Cables includedLAN (RJ-45)
AC adapter includedYes
Packaging content
Quick start guideYes
Cables includedLAN (RJ-45)
AC adapter includedYes
Operational conditions
Operating relative humidity (H-H)0 - 90%
Operating temperature (T-T)0 - 40 °C
Logistics data
Quantity per pack1 pc(s)
Harmonized System (HS) code85176990
Manufacturer Lancom Systems
In Stock Y
Write Your Own Review
You're reviewing:Lancom Systems LX-6400 3550 Mbit/s White Power over Ethernet (PoE)
Search engine powered by ElasticSuite