Poynting XPOL-2-5G network antenna Directional antenna SMA 11 dBi
Special Price
£133.65
£160.38
Regular Price
£247.50
£297.00
Out of stock
SKU
XPOL-2-5G-10
4G, 5G, LTE, 2G, 3G, IP65, 2x2 MIMO, 698-960 MHz, 1710-2700 MHz, 3400-3800 MHz, 10m COAX Cable
| SKU | XPOL-2-5G-10 |
|---|---|
| Manufacturer | Poynting |
| Availability | N |
The XPOL-2-5G is Poynting’s third generation “V3” of this very popular Cross Polarised (XPOL), cellular band, 2×2 MIMO antenna. The antenna enclosure effectively looks the same as the second generation “V2” but has been completely redesigned on the inside. We have used advanced metamaterial technology, making use of Artificial Magnetic Conductors (AMC) and new registered/patent pending radiator configuration, which is proving to yield exceptional improvements in bandwidth and gain. Radiation patterns of this antenna are exceptionally well controlled, further adding to the performance of the antenna.
The XPOL-2-5G antenna includes the newer 3400 – 3800 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 698 – 960MHz, 1700 – 2170MHz, 2300 – 2700MHz & 3400 – 3800MHz. In addition to the new bands, the gain in the 1700MHz and 2.7GHz is around 3dB higher than the “V2” over the same frequency bands! Our “V2” antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design.
So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet – it may look the same, but just wait until you turn the ignition on!
The XPOL-2-5G antenna includes the newer 3400 – 3800 MHz bands, which were not previously covered by our V2 and is suitable for 2G, 3G, 4G & 5G. This antenna performs exceptionally well in the following frequency bands: 698 – 960MHz, 1700 – 2170MHz, 2300 – 2700MHz & 3400 – 3800MHz. In addition to the new bands, the gain in the 1700MHz and 2.7GHz is around 3dB higher than the “V2” over the same frequency bands! Our “V2” antenna already outperformed most competitors over these bands, so this substantial improvement in gain shows the benefits of the new advanced materials and novel radiator design.
So, if it was a car, we installed an entirely new technology engine producing twice the power under the bonnet – it may look the same, but just wait until you turn the ignition on!
| Performance | |
|---|---|
| Antenna gain level (max) | 11 dBi |
| Frequency band | 0.617 - 4.2 GHz |
| Impedance | 50 Ω |
| Gain | 10 / 11 dBi |
| Features | |
| Survival wind speed | 250 km/h |
| Housing material | Acrylonitrile styrene acrylate (ASA) |
| International Protection (IP) code | IP65 |
| Antenna type | Directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5.1 |
| Mounting | Wall/Pole |
| Product colour | White |
| Cable length | 10 m |
| Antenna connector type | SMA |
| Antenna gain level (max) | 11 dBi |
| Frequency band | 0.617 - 4.2 GHz |
| Impedance | 50 Ω |
| Gain | 10 / 11 dBi |
| Certificates | |
| Sustainability compliance | Yes |
| Compliance certificates | CE, RoHS |
| Operational conditions | |
| Operating temperature (T-T) | -40 - 80 °C |
| Storage temperature (T-T) | -40 - 80 °C |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating relative humidity (H-H) | 0 - 98% |
| Weight & dimensions | |
|---|---|
| Width | 265 mm |
| Depth | 265 mm |
| Height | 90 mm |
| Technical details | |
| Antenna gain level (max) | 11 dBi |
| Frequency band | 0.617 - 4.2 GHz |
| Antenna type | Directional antenna |
| Voltage Standing Wave Ratio (VSWR) | 1.5.1 |
| Mounting | Wall/Pole |
| Impedance | 50 Ω |
| Gain | 10 / 11 dBi |
| Cable length | 10 m |
| Antenna connector type | SMA |
| Sustainability compliance | Yes |
| Compliance certificates | CE, RoHS |
| Colour | |
| Product colour | White |
| Packaging content | |
| Mounting kit | Yes |
Write Your Own Review